Відео

Good Video ...Thanks for The Information ....

I'm actually surprised that handles are not held in place by screws.

hi there! how did you detach the key ignition box, my husband and I were watching your video while repeating the steps and somehow you skipped that part on 3:58 and now we are stuck and nothing comes out :( if you have access to this comment pls get back to me. Thanks '

My 2020 mk7 jetta doesn't even have those reflectors. But there's a rectangle hole on the bottom where that release bolt is for the door panel. Will these fit on the bottom in that hole?

Great DIY video! Was able to replace my side mirror in 15 minutes!

So how do the bulbs actually connect? You didn't screw back on the old black backing that was attached to the halogens? How do the bulbs light if no power to back of em? You didn't show how they connect!??

What was the price on the turbo

The best video I ever seen saved my life !

Was he mumbling? I found out where the valve was and could understand most of what he said.

alguem sabe se sao iguais tirando o sensor

In installed these lights, :( got a defect ticket after a week for illegal headlights, the cop explained that the glare he experienced head on was blinding! U need Projector headlights.. damn, i guess don't do it.

Thank you!

I personally would NOT install LED headlights (at least not low beam) in front of reflector housings. You're going to blind the shit out of people that way. Projectors, no problem.

I watched your video and wanted to do the same on my audi a4. I couldn't find the same navigation that you posted the link to, but I found almost the same one. I have a problem with the connection of the concert and the screen. I am missing the connector that you include in the factory cable. I wonder if you can give me the name of the cable so I can find it, because it didn't arrive in the package. i think the output is called lvsd. thank you

Thank you for this video. My wife's A4 has the oil pooling up in the same area and assumed it was the valve cover gasket. Just ordered the TC gasket and the O-ring from FCP Euro. I must say you won the lottery with that stripped screw. If it was me, it would've been the lowest least-accessible screw that stripped.

Do i need to do this if i simply disconnect the battery i need to replace a coil connector

I was able to swap out my turbo by watching this at least 10x before doing it myself with very little mechanical experience. You the goat!

12 Second sleeper, post mods... For sure!! 👍 Glad to see you tinkering VAG products again lol

hey i have some questions with N audi can you help???

The 2.0 fsi works similar?? Or it's different??... becouse I'm trying to find information about that engine but I can't found something similar just tfsi and tsi but nothing about fsi.. please give me a hand..

Root cause: I've watched a few of these headliner repair videos and no one seems to mention the cause. Sure, there's age, but they all "seem" to start sagging where the sunroof drain holes are (2 in the front and 2 in the rear). From the videos I've seen, the leaks/sagging are not necessarily due to clogged drain holes, but due to the unions/joints failing in the drain line tubing. So, after I take care of the drain lines, then I'll repair the headlining. As always, thanks for a great video!

Any ideea why new interface is not showing when car is in reverse ? Old oem does

I have only one bolt on the magnetic plate that’s stripped. I don’t know what else to do

The C5 allroad came with the memory seats on the passenger as well. At least for the first couple of years. Both of my C5 allroads had them, back in the day. Also, I tend to keep a ton of extra Audi bolts. If you happen to have a part number, I'll check to see if I have what you're looking for lol

The trick on the rotor is to put your purse down and hit it like a man😂😂😂😂

Excelent instructions.

Great video, tks Still love my vw se 1.8 sportwagon that i bought new in '15. Waiting for the deautoleds to arrive.

I finally ordered some led low beam from destroyed. 144 dollars for two. Should be a huge improvement. I used the fogs a help the weak halogens.

Just did this yesterday and using the full hole on the side does work, just leave the black inspection hole open as well so you can see the fluid come out

Thanks for the great vid! Any idea approx how many miles 1 notch on the tensioner is?

My car has 50k miles and somehow the belt fuckjng melted

And other led for big lights how you change?

I needed to replace the brakes on my 2013 S4, the fronts were easy. When it came to the back ones I had done my research and read and read about using VAC to reset the back parking brake. I somehow found this video and I watched and reviewed it several times. I decided to go for it and it worked. I will say before you try the parking brake once you are done make sure you have bled the brakes first. Remember you took fluid out so you could retract the parking brake. This video is well worth watching and it made doing the rear brakes so much easier.

When you said there’s shaking at idle especially when the AC is off, I knew my motor mounts are also bad. I wonder why having the AC on smooths out the idle

I just installed this to my car (audi b8 2010 2.0L) and at startup it makes a knocking sound, then after that everything runs fine… Maybe I didnt screw it all the way in?? what do you think?

The hook is to support the cable that runs underneath. Pro tip: DO NOT DO ONE SIDE AT A TIME. Support with floor jack and remove both 18mm’s at the same time. Then you can raise motor higher without putting stress on either side. You’ll have more room making it much easier to r&r. Also on driver side first reach down behind the mount and take off that hook. It’s easy to do and makes it way easier to remove mounting plate and put back. I think it’s a 10mm nut.

and is the airbag button is optional or i need to get it?

Does this come with a rear camera?

✋ *PromoSM*

I took mine off 5 times trying to find my oil leak i re did all my seals an thank you to man who made this video I f Finally fix my oil leak your the man for making this videos 🙏🤘😎

Can you upgrade a sport (no BDM) to this?

Thank you for the video I was trying to figure this out! I have a question I change my upper timing chain cover and gaskets but I didn't use any sealant. Do you think I'll be fine or did you just add some to yours for extra precaution?

Excellent vid

Need help, just bought a 2009 Audi A4 Quattro when shifting into D P N S1 it doesn’t vibrate and is smooth, but when shifting into reverse I get this vibration that bugs me

Hi. Oil mist/spill around engine oil cap, is that because of pcv problem too? Im still using the original pcv from vw. Mk7 GTi

I live in Sydney, Australia. It doesn't snow here either. It does rain. You don't need a wet road or snow for Haldex to engage I did a Haldex change at 59k km (35k miles). The screen had some debris but the hole the pump fits into was filthy. Don't do half a job. Pull the pump, clean the screen, change the O-rings. The O-rings can be bought for AUD10 if you know where to look; AUD25 for genuine parts Made in Hungary on a Chinese site.

My check engine light came on after this. Feeling restored engine power, changed PCV valve with this too. Any suggestions or concerns?

You save the time to place my belt. Thanks...

Rkx tech is another good spot I bought this same from. Was about 30 bucks

How long did this take in total with the figuring out time added in?. 3-4 hrs?